CIM Card Imaging Master    
 
 
 Maxima 841 Healthcare Model (only available for the Americas)

  Automatic-Feed Plastic Card Embosser

Preferred for its compact dimensions and ease of use.
- Particularly suitable for embossing of stress white cards.
- Ideal for hospital card issuing operations
- Available with the following options on request: high character capacity embossing drum, indent module, magnetic stripe and chip encoding station.



 

 

TECHNICAL SHEET
 
available options Infill device in front version (font OCR B1) or in rear (font OCR A1 or MasterCard). LCD off line editing. Auxiliary printer port. Chip contact initializing.
built-in tipper unit No
communication interface Serial RS232 port.
dimensions and weight 535 x 485 x 290 mm x 40 kg, (21"x19"x11,50"x89 lbs)
drum capacity Drum capacity: 60/80/105 characters, embossing and/or infill.
electrical requirements 117 V/60 Hz – 220 V/50 Hz.
input hopper capacity 200 cards. Pre-embossed card feed feature.
magnetic stripe encoding 3 Tracks ISO 7811, LoCo-MeCo/HiCo.
output hopper capacity 100 embossed cards.
performance Approx. 280 CPH
reject Reject hopper.
software Windows based application software. Firmware: self diagnostic, selectable automatic repeat card, pre-encoded card reading with full post processing of the same card, resettable and non resettable counters. System status and diagnostic messages reported on PC.





 Maxima 621

 

 Single-Feed Plastic Card Embosser

 

- The MAXIMA 621 is ideal for producing identity and membership cards in clubs, associations and small enterprises, or as a back-up unit for larger systems.

- Cards are inserted and removed from a single access point for your convenience, using the innovative SPA system.

- Data is accepted from a standard PC keyboard.

- An 80 column LCD display provides easy reading.

- Tried and tested production modules ensure years of trouble-free use.

 

 




 


©Copyright 1999 To Present Escan-UK. All Rights Reserved